We are reaching the first milestone of the Open Garden project.
If today's test goes as predicted we now have:
Any program …
I've just brought an AVR ISP MKII programmers from atmel and I'd like to test It without having a prototype.
The idea is to use the stk500 as a support for the MCU and plug the programmer on the SPROG3 connector, but nothing good came out of it.
Looking around …
This is a sample code to demonstrate how to generate a fast pwm wave with atmel atmega16 micro controller and the AVR LibC distributed in Debian 6.0 aka squeeze.
A basic knowledge of the counter in atmel cpu is required, for more info see the datasheet downloadable from atmel …
On newer system you may have to remove a module which auto-load himself when nokia 770 is plugged.
modprobe -r cdc_phonet
then
Flash the firmware to the 770 keeping home button pressed while powering on and usb-connected to Linux
sudo ./flasher-3.0.amd64 --fiasco …This time me and marabo have realized what so called an 'Automatic Tee Up', which is a device used in golf practice.
The device is controlled by an AtMega16 microcontroller and an open source software written by myself and (sooner or later) available on-line.
We are currently looking for sponsors …